The water-based spray paint, Pintyplus Aqua 2017, has been developed principally to be used inside a house, in reduced spaces or places that have poor ventilation. It is a water-based spray paint in matt colors and low pressure. Does not smell. Excellent adherence and coverage.
The perfect spray paint for painting inside a house.
Applications for the water-based spray paint of Pintyplus
This water-based spray paint is low pressured so painting is possible and becomes usual in your house. The applications with this paint are unlimited! Decorating small objects for handy jobs, arts, and crafts, or scrapbooking among other ideas would be perfect. It’s suitable to apply on paper, cardboard, wood, stone, cement, plaster, metal, plastic, and polystyrene… even painting balloons!
The PintyPlus AQUA water-based spray paint allows home painting in the outdoors. For many, upon hearing the paint spray, they immediately remember the unpleasant, strong odors when in use. Water-based sprays also provide a solution to this problem. PintyPlus water-based products are almost completely odorless! They are easy and trouble-free to use indoors. Due to the low pressure of Aqua, the amount of chest scattering is very small. If you paint while sitting at the table, you don’t have to worry about “paint flowing everywhere” because the paint will be concentrated only on the surface to be painted. Being water-based, it can easily come off our hands with soap.
How to apply the water-based spray paint
The Surface to be painted has to be clean, dry, and free of any contaminant.
- Shake the can vigorously for one minute after hearing the mixing balls inside. Test the product before painting the desired surface by applying it on paper. Keep in mind to measure the proper distance (each job may require a different distance). The paint can be applied from a distance of 10 cm (4 inches.) up to 20 cm (8 inches.) depending on the technique.
- Once finished if the can is not empty, turn it upside down and press the nozzle until only gas comes out. Doing this will assure you clean the interior parts, making them free of paint and ready to use again without any problems.
Recommendations for use of Pintyplus Aqua water-based
On previously painted surfaces, if the paint is in a good state, you can sand it lightly to ease the adhesion of the next layer. If the paint is in a bad condition we recommend removal by sanding or use our paint stripper Tech.
The water-based spray paint Aqua can easily be removed with water and soap while it is wet within the first 15 minutes. Removed the unwanted stains while wet.
Test prior to use on a sample or fragment of the field to be used to prevent incompatibilities.
Start and finish spraying outside the limits of the work.
Follow us on: Facebook and Instagram