The water based spray paint, Pintyplus Aqua 2017, has been developed principally to be used inside a house, in reduced spaces or places that have poor ventilation. It is a water-based spray paint in matt colours and low pressure. Low odor. Excellent adherence and coverage.
The formulation has been developed to offer triple value:
- Painting with minimal overspray, without staining or small drops of paint close to the surface.
- Maximum respect for the health of people and the environment. Low odor.
- Stimulate creativity.
Applications for the water based spray paint of Pintyplus
This water-based spray paint is low pressured so painting is possible and becomes usual in your house. The applications with this paint are unlimited! Decorating small objects for handy jobs, arts and craft or scrapbooking among other ideas would be perfect. It’s suitable to apply on paper, cardboard, wood, stone, cement, plaster, metal, plastic and polystyrene… even painting ballons!
Technical characteristics
- Size 210/150 ml
- Spreading spray = 0.70 m2
- Dry time 1 hour (15 minutes on porous surfaces).
- Repaint after 30 minutes.
Very good adherence on wood, ropes, methacrylate, cork, polystyrene, carbon steel and stainless steel.
How to apply the water based spray paint
The Surface to be painted has to be clean, dry and free of any contaminant.
Shake the can vigorously for one minute after hearing the mixing balls inside. Test the product before painting the desired surface by applying it on paper. Keep in mind to measure the proper distance (each job may require a different distance). The paint can be applied from a distance of 10 cm (4 inch.) up to 20 cm (8 inch.) depending on the technique.
Once finished if the can is not empty, turn it upside down and press the nozzle until only gas comes out. Doing this will assure you clean the interior parts, making them free of paint and ready to use again without any problems.
Recommendations for use of Pintyplus Aqua water based
On previously painted surfaces, if the paint is in a good state, you can sand it lightly to ease the adhesion of the next layer. If the paint is in a bad condition we recommend removal by sanding or use our paint stripper Tech. To paint on plastics we recommend to apply a previous layer of primer for plastic Pintyplus Tech. This primer will also allow you to paint on glass with Pintyplus Aqua.
The water based spray paint Aqua can easily be removed with water and soap while it is wet within the first 15 minutes. Removed the unwanted stains while wet.
Test prior to use on a sample or fragment of the field to be used to prevent incompatibilities.
Start and finish spraying outside the limits of the work.
Don`t use on devices connected to the electrical network and apply in ventilated areas.
Once empty, the spray must be deposited in the yellow container.